POWER
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN
ELECTRICAL SHOCK COULD OCCUR.
• Plug the filled humidifier into a polarized 120V outlet. DO NOT FORCE THE
POLARIZED PLUG INTO THE OUTLET; it will only fit one
way.
HUMIDITY CONTROL
1. Set the Power Knob to the desired position (Fig. 4).
HIGH: For fast humidifying.
LOW: For more gradual humidification.
NOTE: You will not hear a difference when turning the
humidifier from High to Low.
2. Set the Moisture level to high, by turning the Humidity
Level knob (Humidistat) clockwise to the highest
setting of 7.
NOTE: If the humidifier will not start or restart when you
select a power setting, the Humidistat may be set too low.
Turn the knob clockwise to the highest setting. The
Desired Humidity light will be OFF when the unit is
producing moisture (Fig. 4).
3.Press down and release the Refill & Restart lever to TURN ON the
humidifier.
NOTE: Allow 5-10 minutes for the humidifier to begin pr
oducing
moisture
.
Fig. 4
OPERATION
Power
Knob
Humidistat
Knob
To Next Page
Loading...
Need help?
General
