Honeywell LTE-XV User Manual

LTE-X Series Installation and Setup Guide
– 14 –
Diagnostic Commands
The 7720P programming tool can be used to view the connectivity settings and options. To invoke diagnostic commands;
such as [A], [B], [C], etc., the [shift] key MUST used. For example, [shift] + [A] displays the software revision.
Module Identification Displays
[A]
LTE-X
x.x.xx
mm/dd/yy
Software Revision
"x.x.xx" indicates the installed software revision.
Mm/dd/yy indicates month, day and year of the revision.
[B]
MAC
xxxxxxxxxxxx
MAC CRC yyyy
MAC Address
“xxxxxxxxxxxx” indicates the communicator's unique identification number.
"yyyy" indicates the MAC CRC number. These numbers are located on the box and
inside the communicator.
Press the [Space] key to go to the next field.
Press the [BS] key to go to the previous field.
SCID xxxxx xxxxx
xxxxx xxxxx
SCID Display
Displays the identification number assigned to the SIM card (SCID) in this device.
Press the [Space] key to go to the next field.
Press the [BS] key to go to the previous field.
IMEI xxxxxxxx
xxxxxx x
IMEI Display
Displays the identification number assigned to the cellular module in this device.
Press the [Space] key to get the MAC Address.
Press the [BS] key to go to the previous field.
[C]
Mon 01 Jan 2001
05:48:39 am
Time
Retrieves the current date and time from the AlarmNet network in Greenwich Mean
Time (GMT). This display confirms that the communicator is in sync with network.
[D]
Encryption Test
AES Passed!
Encryption Test
Performs a self-test of the AES encryption algorithm.

Honeywell LTE-XV Specifications

General

Brand	Honeywell
Model	LTE-XV
Category	Cell Phone
Language	English