Honeywell Midas Quick Start Guide

4
2. Mounting Details
The Midas
®
gas detector has an integral mounting bracket assembly that is easily mounted
to a suitable vertical surface such as a wall, tool housing, mounting plate on a pole etc.
Drill Template
Drill 2 x
M4 holes
(0.158 in)
58.50mm
(2.3 in)
Note
When reproducing this diagram, be sure to check dimensional
accuracy before drilling.

Honeywell Midas Specifications

General

Power Supply	24 VDC
Detection Technology	Electrochemical, Infrared
Sampling Method	Diffusion
Display	LCD
Communication	Modbus RTU, 4-20mA
Operating Temperature	-20°C to +50°C
Humidity Range	0% to 95% RH (non-condensing)
Target Gas	Multiple gases
Response Time	< 30 seconds
Operating Humidity	0% to 95% RH (non-condensing)
Outputs	4-20mA
Protection Rating	IP66
Certifications	ATEX, UL, CSA
Detection Gases	Oxygen (O2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Methane (CH4), and others