Honeywell NOTIFIER LCD6000T User Manual

PAGE - 12 Installation manual LCD6000
NOTIFIER ITALIA Doc. M-184.1-LCD6000T-ENG Rev A.2 LCD6000_manu
TEST
From the Main Menu through the arrow keys  select the item “TEST” and press the key
to access the display menu of the test zone devices.
The following menu is displayed:
To display the lists of the devices under Test (Sensors or Zones) select through the arrow keys  the
required item, press the key to confirm the selection.
LOCAL PROGRAMMING
Press the key from the state window and subsequently through the arrow keysselect the item
“Local Prog” and
press the key to access the programming menu, where the user can perform the initial configuration of
the LCD-6000T panel and make possible changes
The following menu is displayed :
Use the arrow keys  to
select the function to be
changed and press the Lists
key
to confirm and
access the function
Number counter of devices under test
Number Counter of zone under test

Honeywell NOTIFIER LCD6000T Specifications

General

Brand	Honeywell
Model	NOTIFIER LCD6000T
Category	Repeater
Language	English