OPERATOR MANUAL // SYMBOL DEFINITIONS
HONEYWELL 2
Symbol Definitions
The following table lists those symbols used in this document to denote certain
conditions.
Symbol Definition
ATTENTION: Identifies information that requires special
consideration.
TIP: Identifies advice or hints for the user, often in terms of
performing a task.
REFERENCE-EXTERNAL: Identifies an additional source of
information outside of this bookset.
REFERENCE-INTERNAL: Identifies an additional source of
information within this bookset.
Indicates a situation which, if not avoided, may result in
equipment or work (data) on the system being damaged or lost, or
may result in the inability to properly operate the process.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may also be used
to alert against unsafe practices.
CAUTION: Symbol on the equipment refers the user to the product
manual for additional information. The symbol appears next to
required information in the manual.
To Next Page
Loading...
Need help?
General
