TL8130A1005
13
In Automatic mode, the thermostat follows the programmed schedule (see
page 11). To place the thermostat in this mode, press Mode/Ret until is
displayed.
If you modify the setpoint temperature (by pressing the , or button) when
the thermostat is in Automatic mode, the new temperature will be used until the
beginning of the next period. flashes during the temporary override. You can
cancel the temporary override by pressing Mode/Ret.
Running the schedule (Automatic mode)
Temporary override of schedule
69-1805EF-03.book Page 13 Thursday, February 28, 2013 4:21 PM
To Next Page
Loading...
Need help?
General
