10.
Instructions for Use
IMPORTANT! Always remove the power plug from the power supply before fitting or
removing accessories.
Turning On/Off the Cleaner
1. Unwind a sufficient length of cable. The yellow mark on the power cable
shows the ideal cable length.
DO NOT extend the cable beyond the red mark.
2. Insert the power plug into the power supply.
3. Press the On/Off button to turn the vacuum On or Off.
Using the Handle
1. Press the On/Off button on the handle to operate the powerhead.
2. The Air Relief Valve can be used to regulate the suction power. To reduce
the suction power, push the Air Relief Valve backwards.
Rewinding the Power Cable
1. Press the On/Off Button to turn off the vacuum.
2. Unplug the power cable from the power supply.
3. To rewind the power cable, press the Cable Rewind Button with one hand
and guide the power cable with the other hand to ensure that it does not
whip.
To Next Page
Loading...
Need help?
General
