10
This product contains no servicable parts.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call customer service at 1-800-944-9200 prior to continuing use.
Continue using dry strokes until little water is visible
passing through the nozzle.
For best results, HOOVER
®
recommends rinsing carpet
by lling Clean Water Tank with water only. This
removes residual carpet cleaning solution. For heavily
soiled areas, repeat. Avoid saturating carpet.
NOTE: Regarding the Dirty Water Tank: For full
suction it is important that the Dirty Water Tank Lid
is securely in place. If misplaced, poor to no suction
will result.
NOTE: For full suction, it is important that the Dirty
Water Tank is properly secured before cleaning.
HOW TO EMPTY AND CLEAN YOUR TANKS:
Auto Shut O Float: Your carpet cleaner is equipped with a shut off oat within your Dirty Water Tank. When the Dirty
Water Tank becomes full, the oat will rise, shutting off the air ow through the nozzle. Once the air ow is shut off,
empty the Dirty Water Tank.
5
Empty tank, rinse, and
allow to air dry.
Place on a flat surface
and unlatch Dirty Water
Tank lid to remove top
of tank.
3
Grab the Dirty Water Tank
handle and pull up to
release. Remove Tank
from carpet cleaner base
at an angle.
2
1
Turn the cleaner o and
unplug from electrical
outlet.
4
Remove filter basket
and rinse out any debris.
Allow to air dry. Keeping
the filter clean is critical
to maintain strong suction
performance.
Maintenance
To Next Page
Loading...
Need help?
General
