Hoover Dual Power Max User Manual

12
5.6
5.8
5.7
5.9
5.10
REMOVING AND CLEANING NOZZLE
If lint or other debris becomes lodged in nozzle, it can be
removed for cleaning.
Nozzle: How to Clean
5.6 To prevent possible leaking, remove Clean
Water Tank and Dirty Water Tank with handle in
upright position, tilt carpet washer back.
5.7 Pull up on nozzle latch slightly to unsnap nozzle from
foot of carpet washer.
5.8 Pull nozzle forward to remove from carpet
washer.
5.9 Rinse debris from nozzle.
5.10 Position nozzle on to foot, making sure to align
the tabs at the bottom of the nozzle with the
notches on the foot. Snap nozzle to foot.
STORAGE
Before storing:
• EmptyCleanWaterTankandletairdry. 
Replace on cleaner.
• Empty Dirty Water Tank, rinse tank and lid
thoroughly with clean water and let air dry.
Allow brushes and underside of carpet cleaner to air dry
thoroughly before storing carpet cleaner on a carpeted or
wood surface.
To reduce the risk of injury from moving parts - unplug
cleaner before servicing.
WARNING
! !
BELT OR BRUSHROLL: How to Remove and Replace
5.11 5.12
5.13
5.14
Belt: What to Buy
For replacement belts please order part number
440005536 or to locate a dealer nearest you, please
call 1-800-944-9200 or visit our website at www.
hoover.com
CAUTION
! !
To reduce the risk of injury from moving parts - Unplug
before servicing.
How to Remove
5.11 Flip cleaner on its back to expose bottom of cleaner.
NOTE: Belt cover is 4 pieces and has 15 screws.
5.12 To remove first piece of belt cover, remove 3 screws.
Arrows show location of screws. NOTE: Screw locations are
numbered on belt covers.
5.13 Remove belt guard.
5.14 To remove second piece of belt cover, remove the 3
screws. Arrows show location of screws.

Hoover Dual Power Max Specifications

General

Brand	Hoover
Model	Dual Power Max
Category	Floor Machine
Language	English