Hoover Dynamic Next WDMT413AI2 User Manual

!
EN
13
1) ON/OFF button
Press for at least 1 second the ON/OFF
button to turn on the appliance.
Switching on, the related indicator will light
on, as well as the "X Red Light", waiting
for the selection of a washing programme.
If a programme is not selected within 30
seconds, the appliance will automatically
turn off.
Waiting for the selection of the programme
the display is off.
2) PROGRAMME SELECTION button
Turning on the appliance is also possible by
pushing for at least one second the button
of a selected programme (the display will
light up, showing the parameters of the
selected cycle).
To set another programme, press the
related button (the corresponding indicator
light will light up).
To switch off the appliance, press the
ON/OFF button (for at least 3 seconds).
3) BUTTON SELECTION indicators
They light up at the touch of the related
button.
4) "X Red Light"
It lights up at the pressing of any button of
the Touch Control, with a diffused lighting
fading to the edges.
It gradually turns off within 5 minutes since
the last touch of a button, in order to save
energy.
WARNING:
Don’t touch the display (and the Touch
Control) while inserting the plug because
the machines calibrates the systems
during the first seconds: touching the
display, the machine couldn’t work
property. In this case, remove the plug
and repeat the operation.
Opening the door
A special safety device prevents the
door from being opened immediately
after the end of the cycle.
Wait for 2 minutes after the wash
cycle has finished and the "Door
Security" light has gone out before
opening the door.
Touch Control

Hoover Dynamic Next WDMT413AI2 Specifications

General

Brand	Hoover
Model	Dynamic Next WDMT413AI2
Category	Washer/Dryer
Language	English