If the bag-full indicator continues
to show red after a new bag
is tted, turn the cleaner off,
disconnect from mains supply and
check to see if the hose or wand
are blocked.
If the indicator still indicates red
then consult an authorised service
agent or return to point
of purchase.
CHANGING THE DUST BAG
The cleaner should be switched off and disconnected from the mains
supply.
3. Lift up dust bag holder and gently
remove from cleaner.
2. To remove and replace dust bag,
open dust bag cover.
4. Remove bag by pulling up and out
of frame. Discard bag.
5. Ret new dust bag by sliding back
into frame and tting back into
locating slots in cleaner
1. Change the bag when the indicator
turns to red.
6
To Next Page
Loading...
Need help?
General
