Hoover HBWOS 69TMET-80 User Manual

15
EN
6. QUICK USER GUIDE
This washing machine automatically adjusts
the level of the water to the type and
quantity of washing. This system gives a
reduction in energy consumption and a
saving in washing times.
 Turn on the washing machine and select
the required program.
 Adjust the washing temperature if
necessary and press the required "option"
buttons.
 Press the START/PAUSE button to start
washing.
If there is a break in the power supply
whilst the machine is operating, when
the power is restored, the machine will
restart from the beginning of the phase it
was in when the power was lost.
 At the end of the programme, the
message "End" will appear on the display
or, on some models, all wash stage
indicator lights will turn on.
 Turn off the washing machine.
For any type of wash, see the program
table and follow the operating sequence
as indicated.
Water pressure:
min 0.05 Mpa / max 0.8 Mpa
(0.05 MPa dispenses approximately 1 litre
of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.
7. CONTROLS AND
PROGRAMMES
A
Programme selector with OFF
position
B
START/PAUSE button
C
DELAY START button
D
OPTIONS button
E
RAPID / STAIN LEVEL button
F
TEMPERATURE SELECTION
button
G
SPIN SPEED button
H
ACTIVE STEAM button
(only available on certain models)
H
EASY IRON button
(only available on certain models)
D+B
Start ONE TOUCH
F+G
KEY LOCK
I
Digital display
L
DOOR LOCKED indicator light
M
ONE Fi EXTRA area
Technical data
Wait until the DOOR LOCKED light has
gone out before opening the door.
Program selection

Hoover HBWOS 69TMET-80 Specifications

General

Brand	Hoover
Model	HBWOS 69TMET-80
Category	Washer
Language	English