Hoover HBWOS 69TMET-80 User Manual

6
2. INSTALLATION
 Remove the 2 or 4 transportation
screws (A)
on the back and
remove the 2 or 4
flat washers,
rubber bungs and plastic spacer
tubes (B) as illustrated in figure 1
.

If the washing machine is built
-
in , unscrew the 3 or
4
transportation screws (A)
and
remove the 3 or 4
flat washers,
rubber bungs and plastic spacer
tubes (B) .

During the removal of the screws
occasionally spacer tubes fall
inside the product, these can be
remove by tilting the product forward
and recovering
them from the floor
or inside the base of the machine.

Cover the open transportation screw
holes with the 2 or 4
plastic caps
included in the instruction bag.
WARNING:
keep packaging materials
away from children.

Hoover HBWOS 69TMET-80 Specifications

General

Brand	Hoover
Model	HBWOS 69TMET-80
Category	Washer
Language	English