To Next PageTo Next PageTo Previous PageTo Previous Page
Why Hoover Vacuum Cleaner won't turn on?
If your Hoover Vacuum Cleaner isn't turning on, there are several potential causes: * It might not be firmly plugged into the outlet. Ensure it is securely plugged in. * There might be no voltage in the wall plug. Check the fuse or breaker. * A fuse might be blown, or a breaker tripped. Replace the fuse or reset the breaker as needed.
What to do if my Hoover Vacuum Cleaner has low suction?
If your Hoover Vacuum Cleaner has low suction, consider these possible causes and solutions: * The recovery tank might be full, engaging the automatic shut-off. Remove and empty the recovery tank. * There could be a blockage in the tool at the end of the hose. Remove the tool and clear any blockages. * The recovery tank lid might not be correctly attached. Make sure the lid is securely on. * The hose end might not be properly inserted. Insert the hose end firmly into the hose pocket.
How to fix Hoover MAX Extract when clean water won't dispense?
If the clean water isn't dispensing from your Hoover Vacuum Cleaner, check the following: * Ensure the clean water tank is firmly in place and securely locked. * Check if the clean water tank or detergent container is empty and refill as needed, following the instructions for the surface you're cleaning. * The recovery tank might be full, engaging the automatic shut-off. Empty the recovery tank.
Why Hoover MAX Extract Vacuum Cleaner brushes do not spin?
If the brushes on your Hoover Vacuum Cleaner aren't spinning, here are a couple of things to check: * Make sure you haven't accidentally selected the spill pick-up mode. Change the mode to Wash/Auto Rinse, Rinse Only, or Spot Clean. * An object or debris might have jammed the brushes. Turn the cleaner off, remove any obstructions, and clean the brushes.
What to do if detergent won't dispense in Hoover Vacuum Cleaner?
If the detergent isn't dispensing from your Hoover Vacuum Cleaner, the detergent tank might be empty. Simply fill the detergent tank.
What does it mean when the clean water tank light is on for Hoover MAX Extract Vacuum Cleaner?
If the clean water tank light is on for your Hoover Vacuum Cleaner, it could mean one of two things: * The tank is empty. Fill the water tank. * The water is 'soft' and not detected by the sensor. In this case, the cleaner will continue to operate normally.
What does it mean when the detergent tank light is on for Hoover Vacuum Cleaner?
If the detergent tank light is on for your Hoover Vacuum Cleaner, it could indicate: * The tank is empty. Fill the detergent tank. * The detergent is not detected by the sensor. In this case, the cleaner will continue to operate normally.
General| Brand | Hoover |
|---|---|
| Model | MAX Extract |
| Category | Vacuum Cleaner |
| Language | English |
Basic precautions to follow when operating the appliance.
Lists all parts included in the product packaging.
Step-by-step guide to attach the cleaner's handle assembly.
Instructions for installing the upper clean water tank securely.
How to properly store the hose and power cord after use.
Identifies and explains the main parts and features of the carpet cleaner.
Describes the function of switches, pedals, and triggers.
Critical caution regarding using the cleaner on hard floors without the correct attachment.
Instructions for filling the clean water and detergent tanks.
Step-by-step instructions for emptying and cleaning the dirty water tank.
Pre-cleaning steps including vacuuming, testing, and preparation.
Ensures the carpet is free of loose debris before wet cleaning.
Advises checking fabric labels for cleaning methods.
Recommends testing cleaning solutions on hidden areas.
Steps to protect floors and furniture during cleaning.
How to pre-treat stubborn stains and high-traffic zones.
Warning to avoid cleaning over electrical floor outlets.
Details the wet/dry stroke method for effective carpet cleaning.
Warning against using the cleaner for flammable materials.
Instructions for attaching the hard floor squeegee tool.
Cautions regarding operation and floor safety.
Description and use of the SpinScrub hand tool accessory.
Safety reminder to unplug before handling tools.
Safety advice specific to cleaning stairs.
Safety notes related to tool attachment and stair cleaning.
Specific instructions for cleaning upholstery effectively.
Instructions for cleaning the cleaner's nozzle.
Procedures for removing, cleaning, and replacing brushes.
Steps to detach the brush assembly.
Steps to reattach the brush assembly.
Safety reminder to unplug before performing maintenance.
Solutions for when the cleaner fails to power on.
Troubleshooting steps for reduced vacuum suction.
Solutions for when cleaning solution is not sprayed.
Addresses problems with the hose nozzle not spraying correctly.
Solutions for when the brushes do not rotate during operation.
Troubleshooting for issues with filling tanks or containers.
Safety alert related to troubleshooting procedures.
Advice on using specific Hoover detergents for best results.
Guidance on locating authorized service centers.
Summary of available Hoover cleaning products and their uses.
Safety warning regarding product use and internal components.
Details the duration and scope of the product warranty.
Instructions for submitting a warranty claim.
Lists situations and conditions not covered by the warranty.
Additional conditions and legal aspects of the warranty.
