Refer to the Drying guide table or the fabric labels to select
the most suitable programme.
● Open the door and load the drum with laundry. Ensure
that garments do not hinder closure of the door.
● If drying delicate items press the ‘ACRYLICS/SYNTHETICS’
button to reduce the heat level. Press again on
completion, to select high temperature.
HIGH heat setting
LOW heat setting
● Turn the ‘DRYING TIME’ Selector until the required drying
time aligns with the dial.
● The Fast Iron programme provides a conditioning and
anti-crease function. The dryer will heat the load for 8
minutes followed by a 2 minute cool down period and is
especially good for garments which may have been left
for some time prior to ironing, in a linen basket for
example. Garments may also become stiffened when
dried outside on a washing line or inside on radiators. The
Fast Iron process relaxes the creases in the fabric making
ironing quicker and easier.
● Gently close the door pushing it slowly until you hear the
door ‘click’ shut.
● Press the ‘ON’ button. The indicator will light and the
drying cycle begins.
● The load is dried by tumbling in thermostatically
controlled warm air. Cool air is used for the last 15
minutes to reduce creasing and cool the load ready for
handling.
● When the program is fully completed the drum will stop
rotating and the dial will point to 0.
● Open the door and remove the load.
● Clean the filter and empty the water container after every
drying cycle to ensure maximum dryer efficiency.
● Clean the condenser after approximately every 10 drying
cycles to ensure maximum dryer efficiency.
15
Operation
WARNING!
The drum, door and
load may be very hot.
To Next Page
Loading...
Need help?
General