Solvent cleaning wax method
Wood and sealed cork floors may be damaged by using water solutions;
therefore, use only those cleaners and waxes recommended specifically
for wood or cork.
The following directions are for cleaning wood or cork floors with a
cleaning polishing solvent base
liquid
wax.
I.
Vacuum floor to remove loose dirt and litter. Wipe up sticky spots with
a damp cloth.
2. Apply wax-cleaner according to manufacturer’s instructions on the
container.
Do not dispense wax from tank. Do not use shampoo-
polisher to apply solvent base liquid wax to the floor.
3. Refer to “Polishing and buffing floors”.
Waxing floors
There are two types of wax to use on hard surface floors: water-base and
solvent base.
Water-base wax
Water-base wax is a self-pol-
ishing wax which does not con-
tain a petroleum solvent. It can
be used on all hard surface floors
except wood and cork.
Follow the directions on the
container to apply. Do not
polish or buff this wax.
Solvent-base wax
Solvent-base wax can be identified by the caution statement: “Flam-
mable” or “Combustible” on the label. It is used on wood or cork floors
and can be polished and buffed when dry.
Do not use solvent-base wax
on asphalt or rubber tile or other hard surface floors unless specified
by the manufacturer.
To Next Page
Loading...
Need help?
General
