IMPORTANT: Don’t operate the steam mop without hard water lter in place. The condition of the lter aects the
performance of your machine, check and change lter periodically. If you live in an area of hard water the lter will
discolour or darken over time. Depending on water hardness and frequency of use, the lter should be changed every
3 to 6 months or if the lter has discoloured.
Replacing the hard water lter
Removing blockages
MAINTENANCE
11
Pull to remove the hard
water lter
New lter
(beige/cream colour)
Hard water lter
should be replaced
every 3 to 6 months or
if discoloured
Remove the water tank
to access the hard
water lter
3-6 Months
If there is an obstruction
to the steam ow
through the machine,
steam may be released
through the bleed valve
located on the side of
the handheld
With the pad removed
from the oor head,
insert a small thin object
such as a paper-clip in
to the steam holes to
remove a blockage
To remove the oor
head from main body
push the oor head
release button and li
Aer oor head is
removed, using a thin
object such as a paper-
clip (in the area shown),
insert to remove
the blockage
To Next Page
Loading...
Need help?
General
