Loading and using the drger.
Alwags follow thefabric manufacturer's carelabel when laundering.
Hotpoint.com
__i Venting the Drger
Forthe best drying performance, the dryer needs to be properly vented. The drger will use more energg
and run longer if it is not vented to the below specifications. Carefullg follow the details on Exhausting
in the Installation Instructions.
• Use only rigid metal 4" diameter ductwork inside the dryer cabinet. Use only rigid metal or UL listed
flexible metal 4" diameter ductwork for exhausting to the outside.
• Do not use plastic or other combustible ductwork.
• Use the shortest length possible.
• Do not crush or collapse.
• Avoid resting the duct on sharp objects.
• Venting must conform to local building codes.
Correct
Venting
(
Incorrect
Venting
To Next Page
Loading...
Need help?
General