Top cover
NOTE: The top cover spare part kit includes the TouchPad.
Description Spare part number
Top cover for use in black licorice/textured HP 15 models (includes touchpad) 749639-001
Top cover for use in purple HP 15 models (includes touchpad) 775088-001
Top cover for use in sparkling black HP 15 models (includes touchpad) 768276-001
Top cover for use in red HP 15 models (includes touchpad) 760958-001
Top cover for use in white HP 15 models (includes touchpad) 760959-001
Top cover for use in blue HP 15 models (includes touchpad) 760960-001
Top cover for use in silver HP 15 models (includes touchpad) 760961-001
Top cover for use in gray Compaq 15 models (includes touchpad) 749640-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 35).
5. Remove the keyboard (see
Keyboard on page 39).
To remove the top cover:
1. Position the computer upside down with the front toward you.
2. Remove the rear covers by prying off the two rubber feet (1), removing the two Phillips PM2.5×8.0
screws (2) that secure the rear covers to the computer, and then lifting the rear covers off the computer
(3).
Component replacement procedures 47
To Next Page
Loading...
Need help?
General
