HP 17-x Series User Manual

Optical drive
Description Spare part number
Optical drive (DVD+/-RW Double-Layer SuperMulti) 756564-037
Optical drive bracket 856610-001
Optical drive bezel 856598-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 32).
To remove the optical drive:
1. Remove the Phillips PM2.5×8.0 screw (1) that secures the optical drive to the computer.
2. Remove the optical drive (2) by sliding it out of the optical drive bay.
Component replacement procedures 33

HP 17-x Series Specifications

General

Brand	HP
Model	17-x Series
Category	Laptop
Language	English