HP 415E User Manual

Model 415E Section V
Figure 5-4
ХАЗ PIN 7 ХАЗ PIN 5
ІМУ Р-Р 1.5MV Р-Р
(BANDWIDTH —24VDC
40KC; SWEEP: (SWEEP: 5MSEC/CM)
5MSEC/CM)
ХАЗ
PIN
6
ХАЗ
РІМ
4
І ЗМУ Р-Р 76У Р-Р
—-24VDC
*l4vDC
(SWEEP: 5MSEC/CM (SWEEP: 5M SEC/CM
ХАЗ PIN З
80v Р-Р 8MV P-P
+14VDC -12.8У0С
(SWEEP:5MSEC/CM) (SWEEP: 5MSEC/CM
XA3 PIN 2 ХАЗ PIN 9 L
ТММ P-P 21МУ Р-Р
#13.2VDC -l2.8v0C
(SWEEP: SMSEC/CM
415Е-А-15
MEASUREMENT CONDITIONS (unless otherwise noted). ж
a. Model 415E set to HIGH, NORM, RANGE 0, BANDWIDTH cw, FREQ centered, GAIN 6 VERNIER cew,
LINE/ON.
b. MODEL 140A with 1420А & 1400A set to 0. 2 msec/cm, АС, 400 kc, and appropriate vertical sensitivity.
с. Model 200СЕ Oscillator set to about 1000 cps, and for 0 db Model 415E meter reference.
d. Model 412A DC Voltmeter set to appropriate range.
ЖАП
measurements
made
with
respect
to
415E
common
(black
terminal
rear
panel
AMPLIFIER
OUTPUT
connector).
Figure 9-5. Power Supply Waveforms (AC OPERATION - ONLY)
02152-1 5-13

HP 415E Specifications

General

Brand	HP
Model	415E
Category	Measuring Instruments
Language	English