Fan
Description Spare part number
Fan for use in 39.6-cm (15.6-in) computer models 605791-001
Fan for use in 33.8-cm (13.3-in) and 35.6-cm (14.5-in) computer models 605787-001
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 51).
5.
Remove the service door (see
Service door on page 52).
Remove the fan:
1. Position the computer upside down with the front toward you.
2. Disconnect the fan cable (1) from the system board .
3. Remove the Phillips PM2.0×3.0 screw (2) that secures the fan, and then remove the fan (3).
Reverse this procedure to install the fan.
Component replacement procedures
65
To Next Page
Need help?
General
