HP 655 User Manual

7 Backup and recovery
Your computer includes tools provided by the operating system and HP to help you safeguard your
information and restore it if necessary.
This chapter provides information about the following topics:
●
Creating a set of recovery discs or a recovery flash drive (HP Recovery Manager software feature)
●
Performing a system restore (from the recovery partition, recovery discs, or a recovery flash drive)
●
Backing up your information
●
Recovering a program or driver
Restore
In the event of hard drive failure, to restore your system to its factory image you must use a set of
recovery discs or a recovery flash drive that you have created using HP Recovery Manager. HP
recommends that you use HP Recovery Manager immediately after software setup to create either a set
of recovery discs or a recovery flash drive.
If you need to restore your system for some other reason than hard drive failure, you can use the HP
Recovery partition (select models only), without the need for recovery discs or a recovery flash drive. To
check for the presence of a recovery partition, click Start, right-click Computer, click Manage, and
then click Disk Management. If the recovery partition is present, a Recovery drive is listed in
the window.
CAUTION: HP Recovery Manager (partition or discs/flash drive) restores only the software that was
installed at the factory. Software not provided with this computer must be reinstalled manually.
NOTE: Recovery discs have been included if your computer does not have a recovery partition.
84 Chapter 7 Backup and recovery

HP 655 Specifications

General

Wireless	802.11b/g/n
RAM	Up to 8GB DDR3
Storage	320GB HDD
Display	15.6-inch HD (1366x768)
Graphics	AMD Radeon HD 7340
Operating System	Windows 8
Weight	2.45 kg
Battery	6-cell Li-ion
Ports	1 x HDMI, 1 x VGA, 1 x RJ-45
Processor	AMD E2-1800 APU