2. Remove the cap from the HP bt400 and insert it into
the port.
LED behavior
The LED on the HP bt400 tells you what is going on.
● Blinking—This is the default state and means the
device is installed and has power.
● Rapid blinking—A sending device is “Discovering” the
HP bt400.
● On steady—The HP bt400 is receiving data.
Bluetooth access modes
Access modes determine how easily a Bluetooth sending
device can print to a printer. The access modes are
defined by the following settings:
● Accessibility
● Security level
Welcome to the HP bt400 5
To Next Page
Loading...
Need help?
General
