High Definition Audio
Type
Integrated
Realtek 4-channel ALC261 HD
Stereo Codec
DAC supports 16/20/24-bit PCM format for 4 channel audio solution
Two stereo ADCs support 16/20-bit PCM format
All DACs support independent 44.1k/48k/96kHz sample rate
All ADCs support independent 44.1k/48k/96kHz sample rate
Audio I/O Ports
Front microphone-In (150-K ohm Input Impedance
Rear Line-In/Microphone input (150-K ohm Input Impedance, function is configurable by audio
driver)
Rear Line-Out (190 ohms Output Impedance, expects at least a 10-K ohm load)
Front Headphone-Out (0.5 Ohm Output Impedance, expects at least a 32 ohm load)
Front Microphone/Headphone jack is re-task able to provide Microphone input, line-in or Headphone
output to support connecting two headphones to the front of the system. When configured as a
second front headphone output, both front headphone outputs are always driven with the same
signal.
Speakers
System includes an internal PC speaker rated 1.5W powered by an internal amplifier. External
speakers must be powered externally.
Multistreaming Capable
Multi-streaming can be enabled in the Realtek control panel to allow independent audio streams to
be sent to/from the front and rear jacks.
Analog Audio
Yes
HP Thin USB Powered Speakers
On/Off/Volume Controls
Right side of right speaker
Power LED
Front of right speaker (green)
Frequency Response
FO to 20kHz
Watts
2/3 watt (normal/maximum)
Dimensions/Speaker
(H x W x D)
5.72 x 3.74 x 0.96 in
14.52 x 9.50 x 2.45 cm
Net Weight
0.68 lbs
0.31 kg
Color
Black
Environmental
(all conditions non-condensing)
Operating Temperature:
14° to 104° F
–10° to 40° C
Relative Humidity
40% to 90%
Speaker Cable Length
Input Cord:
5.91 ft
1800mm
L-channel Cord:
3.28 ft
1000mm
USB Cord:
5.91 ft
1800mm
QuickSpecs
HP Compaq 8100 Elite Series
Technical Specifications - Audio
DA - 13524 Worldwide — Version 27 — September 30, 2011
Page 23
To Next Page
Loading...
Need help?
General