2–4 Hardware Reference Guide
Battery Replacement
7. To insert the new battery, slide one edge of the replacement
battery under the holder’s lip with the positive side up. Push the
other edge down until the clamp snaps over the other edge of the
battery.
Inserting the Battery
✎
After the battery has been replaced, use the following steps to
complete this procedure.
8. Replace the computer cover or access panel.
9. Plug in the computer and turn on power to the computer.
Reset the date and time, your passwords, and any special system
setups, using Computer Setup. Refer to the Computer Setup (F10)
Utility Guide.
To Next Page
Loading...
Need help?
General