Computer Setup Utility Guide 9
Computer Setup (F10) Utility
Hardware Monitor
(Continued)
Chassis FAN Speed Detects current chassis FAN speed
CPU VID Detects current CPU voltage
Vccp Detects current Vccp voltage
+1.5V Detects current ATX power +1.5V
+2.5V Detects current ATX power +2.5V
+3.3V Detects current ATX power +3.3V
+5.0V Detects current ATX power +5.0V
+12.0V Detects current ATX power +12.0V
HVcc (+3.3VSB) Detects current HVcc voltage
Password Option Change Supervisor
Password
Allows you to set and change the
supervisor password
Password Status Shows password status
Password Check Allows you to set the password check
when the supervisor password is set up
• Setup: Password prompt appears
when BIOS is executed
• Always: Password verification is
checked every time the computer
boots (Default)
Load Default Settings None Loads the optimal default values for all of
the setup options
Computer Setup (Continued)
Heading Option Description
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
To Next Page
Loading...
Need help?
General