2-28 361834-001 Technical Reference Guide
System Overview
2.4.9 Graphics Subsystem
These systems use the 82915G or 82915GV GMCH component that integrates an Intel graphics
controller that can drive an external VGA monitor. The integrated graphics controller (IGC)
features a 333-MHz core processor and a 400-MHz RAMDAC. The controller implements
Dynamic Video Memory Technology (DVMT 3.0) for video memory. Table 2-5 lists the key
features of the integrated graphics subsystem.
The IGC of the 82915G used in the SFF, ST, MT, and CMT form factors supports upgrading
through a PCI Express x16 graphics slot. The IGC of the 82915GV used in the USDT form
factor does not support a PCI Express x16 graphic slot and may only be upgraded through the
PCI 2.3 slot.
2.4.10 Audio Subsystem
These systems use the integrated AC97 audio controller of the chipset and the ADI 1981B audio
codec. These systems include microphone and line inputs and headphone and line outputs and
include a 3-watt output amplifier driving an internal speaker. All models feature front
panel-accessible microphone in and headphone out audio jacks as standard.
Table 2-5
Integrated Graphics Subsystem Statistics
82915G or GV GMCH
Integrated Graphics Controller
Recommended for: Hi 2D, Entry 3D
Bus Type Int. PCI Express
Memory Amount 8 MB pre-allocated
Memory Type DVMT 3.0
DAC Speed 400 MHz
Maximum 2D Res. 2048x1536 @ 85 Hz
Software Compatibility Quick Draw,
DirectX 9.0,
Direct Draw,
Direct Show,
Open GL 1.4,
MPEG 1-2,
Indeo
Outputs 1 RGB
To Next Page
Loading...
Need help?
General