Button lockouts
Holding down the power button or Menu button for ten seconds will lock out the functionality of that
button. You can restore the functionality by holding the button down again for ten seconds. This
functionality is only available when the display is powered on, displaying an active signal, and the
OSD is not active.
Product support
For additional information on using your monitor, go to http://www.hp.com/support. Select your
country or region, select Troubleshooting, and then enter your model in the search window and click
the Go button.
NOTE: The monitor user guide, reference material, and drivers are available at http://www.hp.com/
support.
If the information provided in the guide does not address your questions, you can contact support. For
U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to
http://welcome.hp.com/country/us/en/wwcontact_us.html.
Here you can:
●
Chat online with an HP technician
NOTE: When support chat is not available in a particular language, it is available in English.
●
Find support telephone numbers
●
Locate an HP service center
Preparing to call technical support
If you cannot solve a problem using the troubleshooting tips in this section, you may need to call
technical support. Have the following information available when you call:
●
Monitor model number
●
Monitor serial number
●
Purchase date on invoice
●
Conditions under which the problem occurred
●
Error messages received
●
Hardware configuration
●
Name and version of the hardware and software you are using
Button lockouts 29
To Next Page
Loading...
Need help?
General