Getting Started with Your Notebook
Step 5: Set Up Windows
Your notebook has the Microsoft Windows operating system
preinstalled on its hard drive. The first time you turn on your
notebook, the Windows Setup program runs automatically and
includes opportunities to customize your setup.
1. Follow the Setup program instructions on the screen. If the
program prompts you to enter the Product ID code, locate
the code on the bottom of the notebook.
2. Check the modem country or region settings. Select Start >
Control Panel > Printers and Other Hardware > Phone and
Modem Options, then choose your country/region.
Using the Documentation CD
Information about using the notebook can be found on the
Documentation CD included with the notebook. To view a guide:
1. Insert the Documentation CD into a CD or DVD drive. If
autorun is enabled, the reference library menu is displayed on
the screen (this may take a few seconds).
2. Select the guide you want to read from the reference
library menu.
3. If prompted, accept the Adobe® Acrobat® Reader license
agreement or install Acrobat Reader by following the
instructions on the screen.
1–12 Startup Guide
To Next Page
Loading...
Need help?
General
