Troubleshooting
Configuring Your Notebook
The BIOS Setup utility helps you configure your notebook
operation.
To Run the BIOS Setup Utility
The BIOS (basic input and output system) Setup utility enables
you to make changes to the notebook system configuration, and
to tailor the operation of your notebook to your individual work
needs.
The settings made in BIOS Setup generally control the notebook
hardware, and so greatly affect how the notebook operates.
1. Select Start > Turn Off Computer > Restart.
2. When the logo screen appears, press
F2 to enter BIOS Setup.
3. The pointing devices are not active in BIOS Setup, so you
will need to use the keyboard to navigate:
❏ Press the left and right arrow keys to move among menus.
❏ Press the up and down arrow keys to move among
parameters in a menu.
❏ Press + or - to move through values for the current
parameter, or press
enter to change a setting.
4. After you select the options you want, press
F10 or use the
Exit menu to exit BIOS Setup.
5. If the settings cause a conflict between devices during reboot,
the system prompts you to run BIOS Setup, and marks the
conflicting settings.
Startup Guide 4–7
To Next Page
Loading...
Need help?
General
