Taking Photos
This camera is designed to make the experience of taking photos simple and quick. It’s
Auto mode feature will optimise the internal settings so that in most situations, it can
take photos with ease. This camera also has additional modes and features that extend
the capabilities for the more experienced user.
Power on the camera by pressing the 1. Power
button
.
Frame the shot using the focus bracket on the 2.
LCD monitor. See illustration on the right.
Lightly pressing the 3. Shutter button
down to the halfway position will start the
automatic focus and adjustments to the exposure
level. When the camera has successfully completed
this automatic routine, the focus bracket will turn
green. If the automatic focus and exposure routine
is not successful, the bracket will turn red. If this
occurs, simply release the shutter and repeat
this step until the bracket turns green. In some
situations, lighting and contrast may be insufficient
for the camera to successfully complete the auto
focus and exposure level routine. If this occurs, try
better lighting.
Pressing the 4. Shutter button down fully will take the photo. If you take the
photo when the bracket is red, the focus and exposure may not be correct.
If the shake warning icon
appears, hold the camera steadily, with your arms at your
side or use a tripod to stabilize the camera to reduce the risk of blurred photos.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
