Setting the Scene Mode
By simply selecting one of the following 30 modes, you can capture the image with the
most appropriate settings.
From the Record 1. MENU button , tap to select Scene Mode. Or, tap onscreen
Record mode button (red color) to enter scene mode.
Use the 2.
and to move through the selections.
The highlighted scene mode will either have text that describes the benefits of the 3.
mode or have a sidebysidephoto comparison that illustrates the benefits. The photo on
the left is a typical auto mode result and the photo on the right illustrates the benefit
of selecting that scene mode. It is important to note that by selecting a particular
scene mode (other that Auto) will take the camera out of it’s normal automatic settings
capabilities and therefore optimise various settings that match a specific scene.
Press the 4.
to save and activate the selected scene mode.
It is important to return the camera to the Auto mode when finished shooting specifics 5.
conditions. This will reduce the risk of taking a bad photo in normal situations. If the
camera is powered off and then powered on, it will return to Auto scene mode be default.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
