HP Elite 8300 Series Small Form Factor User Manual

Bezel Blank
Description Spare part number
Bezel blank 593230-001
On some models, there is a bezel blank covering the external drive bay that needs to be removed
before installing a drive. To remove a bezel blank:
1. Remove the computer access panel (
Access Panel on page 208).
2. Remove the front bezel (
Front Bezel on page 209).
3. To remove the bezel blank, push the two retaining tabs that hold the bezel blank in place
towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 9-5 Removing a bezel blank
212 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis

HP Elite 8300 Series Small Form Factor Specifications

General

Brand	HP
Model	Elite 8300 Series Small Form Factor
Category	Desktop
Language	English