Graphics card
NOTE: All graphics card spare part kits include replacement thermal material.
Description Spare part number
NVIDIA NVS 5100 graphics card 595820-001
NVIDIA Quadro FX 880 graphics card 595821-001
NVIDIA Quadro FX 1800 graphics card 595822-001
ATI FirePro M5800 graphics card 595823-001
Before removing the graphics card, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 47).
5. Remove the following components:
a. Keyboard (see
Keyboard on page 65)
b. Switch cover (see
Switch cover on page 72)
c. Fan (see
Fan on page 74)
d. Heat sink (see
Heat sink on page 76)
Remove the graphics card:
1. Position the computer right-side up, with the front toward you.
2. Remove the two Phillips PM2.5×3.0 screws (1) that secure the graphics card to the computer.
(The edge of the board opposite the graphics card slot rises away from the computer.)
80 Chapter 4 Removal and replacement procedures