Display
Low blue light mode (select products only)
The computer display is shipped from the factory in low blue light mode for improved eye comfort and safety.
Also, blue light mode automatically adjusts blue light emissions when you are using the computer at night or
for reading.
WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation
setup and proper posture, health, and work habits for computer users. The Safety & Comfort Guide also provides
important electrical and mechanical safety information. The Safety & Comfort Guide is available on the web at
http://www.hp.com/ergo.
Table 2-3 Display components and their descriptions
Component Description
(1) WLAN antenna(s)* (2) Send and receive wireless signals to communicate with WLANs.
(2) Internal microphones Record sound.
(3) Camera Allows you to video chat, record video, and record still images. Some
cameras also allow a facial recognition logon to Windows, instead of a
password logon.
NOTE: Camera functions vary depending on the camera hardware
and software installed on the product.
(4) Camera light On: The camera is in use.
*The antenna(s) are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around
the antenna(s) free from obstructions.
For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to the country or region.
To access this guide:
▲ Type HP Documentation in the taskbar search box, and then select HP Documentation.
Display 7
To Next Page
Loading...
Need help?
General