EasyManuals Logo
Home>HP>Laptop>ENVY x360 13

HP ENVY x360 13 User Manual

HP ENVY x360 13
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
6 Computer Setup (BIOS), TPM, and HP Sure
Start
Using Computer Setup
Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and output
devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup includes
settings for the types of devices installed, the startup sequence of the computer, and the amount of system and
extended memory.
NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the computer from
operating properly.
Starting Computer Setup
Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup.
Navigating and selecting in Computer Setup
To select a menu or a menu item, use the tab key and the keyboard arrow keys and then press enter, or
use a pointing device to select the item.
To scroll up and down, select the up arrow or the down arrow in the upper-right corner of the screen, or use
the up arrow key or the down arrow key on the keyboard.
To close open dialog boxes and return to the main Computer Setup screen, press esc, and then follow the
on-screen instructions.
To exit Computer Setup, choose one of the following methods:
To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and Exit,
and then select Yes.
NOTE: If you are using arrow keys to highlight your choice, you must then press enter.
To save your changes and exit Computer Setup menus, select Main, select Save Changes and Exit, and then
select Yes.
NOTE: If you are using arrow keys to highlight your choice, you must then press enter.
Your changes go into eect when the computer restarts.
Restoring factory settings in Computer Setup
NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Start Computer Setup. See Starting Computer Setup on page 65.
2. Select Main, select Apply Factory Defaults and Exit, and then select Yes.
NOTE: If you are using arrow keys to highlight your choice, you must then press enter.
Using Computer Setup 65

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ENVY x360 13 and is the answer not in the manual?

HP ENVY x360 13 Specifications

General IconGeneral
BrandHP
ModelENVY x360 13
CategoryLaptop
LanguageEnglish

Related product manuals