HP 19” Color Monitor User’s Guide
Setting the Amount of Displayed Information
8 EnglishEnglish
Setting the Amount of Displayed Information
It is recommended that you use a resolution of 1280 x 1024 at 85 Hz.
This gives easy-to-read characters, a large amount of displayed
information and a flicker-free image.
You can make adjustments to the displayed image which are
automatically saved for the resolution you are using. For example, if you
adjust your monitor when working in SVGA, those settings are saved for
SVGA. If you then work in VGA and change the image settings, they are
saved for VGA. The next time you switch back to SVGA your previous
settings are used automatically.
To find out which resolutions are supported by your monitor, refer to
“What Video Modes are Supported” on page 9. To change the screen
resolution, please refer to the manual that came with your computer or
your operating system documentation.
Your monitor has a Plug and Play capability (VESA DDC1/2B standard)
which enables it to identify itself to suitably equipped HP computers.
This will automatically give you the best refresh rate for the resolution
that you have set. Also, by using the appropriate software (when
available) you can adjust the monitor settings directly from your
computer.
p4815a.book Page 8 Monday, March 11, 2002 11:35 AM
To Next Page
Loading...
Need help?
General
