English
English
5
HP 19” Color Monitor User’s Guide
Setting Up Your Monitor
Connecting the Cables
CAUTION Before you connect any cables or install your HP monitor, refer to the
safety instructions at the beginning of this manual. Refer to the user
manual which accompanies your computer and video adapter to
ensure this equipment is correctly installed.
1
Ensure your computer is switched off.
2
Connect the video cable (it has a 15-pin plug) to the video outlet
on your computer. Tighten the thumbscrews on the plug.
3
Connect the power cord to the monitor.
4
Plug the power cord into the power outlet.
NOTE The location of your computer's video cable connector may be
different to the one shown. Refer to the manual that came with your
computer, if necessary.
1
2
3
p4815a.book Page 5 Monday, March 11, 2002 11:35 AM
To Next Page
Loading...
Need help?
General
