EasyManuals Logo
Home>HP>Monitor>LP2465

HP LP2465 User Manual

HP LP2465
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
ENWW
Problem Possible Cause Solution
HP Display LiteSaver
doesn't turn off the monitor
screen.
The Activity Extension time has
not elapsed.
The default Activity Extension value is set to 10 minutes.
The HP Display LiteSaver will wait to detect no input or
movement from the keyboard or mouse for 10
consecutive minutes after the Display Off time has
passed, before the monitor enters into low-power mode.
For example, if the Display Off time is set to 5 minutes
from the current time and the Activity Extension is set to
10 minutes, the HP Display LiteSaver will not actually
turn off the display until 10 minutes of inactivity has
elapsed, even though the Display Off time is 5 minutes
from now.
The HP Display LiteSaver may not
be compatible with the computer
system. Some notebook
computers are not compatible and
the monitor power can not be
controlled.
Confirm that the HP Display LiteSaver is compatible with
the system.
1. Right-click on the HP Display LiteSaver icon in the
system tray.
2. Select Power Off Display from the menu.
The monitor screen should turn off if the system is
compatible. To turn the monitor back on, wait 5 seconds
and move the mouse.
NOTE If the monitor did not turn off, then the
computer graphics driver is not compatible with
the HP Display LiteSaver software.
The monitor is off but it did The monitor's power saving Check the monitor's OSD menu setting for power saving
not seem to enter into a control is disabled. enable/disable controls. The control should be set to
low-power sleep mode. enable to allow the monitor to enter into low-power
modes.
Using the Worldwide Web
For the online access to technical support information, self-solve tools, online assistance, community
forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to
http://www.hp.com/support
Preparing to Call Technical Support
If you cannot solve a problem using the trouble shooting tips in this section, you may need to call
technical support. Have the following information available when you call:
The monitor
Monitor model number
Serial number for the monitor
Purchase date on invoice
Conditions under which the problem occurred
Error messages received
34 Appendix A Troubleshooting

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP LP2465 and is the answer not in the manual?

HP LP2465 Specifications

General IconGeneral
Pixel pitch0.27 x 0.27 mm
Aspect ratio16:10
Response time6 ms
Display diagonal24 \
Separate H/V syncYes
Display resolution1920 x 1200 pixels
Vertical scan range48 - 85 Hz
Viewable size, vertical326 mm
Contrast ratio (dynamic)-
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal520 mm
Display brightness (typical)500 cd/m²
USB hub version2.0
DVI-I ports quantity2
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity5
Product colorBlack, Silver
Country of originChina
Pivot angle0 - 90 °
Tilt angle range-5 - 25 °
Cable lock slot typeKensington
Panel mounting interface100 x 100 mm
Power consumption (standby)2 W
Power consumption (typical)75 W
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)232 mm
Height (with stand)371 mm
Depth (without stand)92 mm
Width (without stand)554 mm
Height (without stand)366 mm
Weight (without stand)10700 g

Related product manuals