HP M31379 User Manual

14
HDMI connector P200/P201
Repair the HDMI connector:
1) Use a soldering iron and a disordering pump to remove as much solder as possible from the pin.
2) Use a soldering iron or hot air gun to melt the solder on the pins.
3) Lift the P200/P201 connector from the PCB.
4) Place the new component on the PCB. Be sure that it matches the PCB footprint.
5) Solder the new component.

HP M31379 Specifications

General

Brand	HP
Model	M31379
Category	Monitor
Language	English