HP Mini 210-1010 Maintenance And Service Guide

5. Disconnect the speaker cable (1) from the system board.
6. Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect the
TouchPad cable (3) from the system board.
7.
Remove the five Phillips PM2.0×6.0 screws that secure the top cover to the base enclosure.
8. Release the top cover (1) by lifting the rear edge until it disengages from the base enclosure.
Component replacement procedures
57

HP Mini 210-1010 Specifications

General

Brand	HP
Model	Mini 210-1010
Category	Laptop
Language	English