Display assembly
Description Spare part
number
25.7-cm (10.1-in) display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers
and cables, and webcam/microphone module and cable):
For use only with HP Mini 2102 and 210 computer models:
●
HD, flush glass display assembly in black 612201-001
●
HD, flush glass display assembly in blue 612199-001
●
HD, flush glass display assembly in red 612203-001
●
HD, flush glass display assembly in silver 612197-001
●
WSVGA, flush glass display assembly in black 612200-001
●
WSVGA, flush glass display assembly in blue 612198-001
●
WSVGA, flush glass display assembly in red 612202-001
●
WSVGA, flush glass display assembly in silver 612196-001
●
WSVGA, AntiGlare, flush glass display assembly in pink 605040-001
●
HD, AntiGlare, flush glass display assembly in pink 605041-001
25.7-cm (10.1-in), WSVGA, AntiGlare, standard display assembly in white for use only with HP
Mini 2102 and 210 computer models
605039-001
25.7-cm (10.1-in), WSVGA, AntiGlare, standard display assembly in black for use only with
Compaq Mini 210 computer models
589649-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 38).
5.
Remove the service cover (see
Service cover on page 40).
6.
Disconnect the WWAN antenna cables from the WWAN module (see
WWAN module
on page 45).
7.
Disconnect the WLAN antenna cables from the WLAN module (see
WLAN module on page 47).
8.
Remove the keyboard (see
Keyboard on page 52).
9.
Remove the top cover (see
Top cover on page 56).
Component replacement procedures
61
To Next Page
Loading...
Need help?
General