System Configuration Menu
Select To do this
Language Support Change the Setup Utility language.
Fan Always On Enable/disable Fan Always On. When enabled, the computer
fan will always be on (enabled by default).
Action Keys Mode Enable/disable Action Keys Mode (enabled by default).
Boot Options Set the following boot options:
●
f10 and f12 Delay (sec.)―Set the delay for the f10 and
f12 functions of Setup Utility in intervals of 5 seconds
each (0, 5, 10, 15, 20).
●
Floppy boot―Enable/disable floppy boot (disabled by
default).
●
Internal Network Adapter boot―Enable/disable boot
from Internal Network Adapter (disabled by default).
●
Boot Device Priority―Set the boot device priority for:
◦
Internal hard drive
◦
USB Diskette on Key/USB hard drive
◦
USB CD/DVD ROM drive
◦ USB floppy
◦
Network adapter
NOTE: Only the devices attached to the system
will appear in the boot order menu.
Diagnostics Menu
Select To do this
Hard Disk Self Test (select models only) Run a comprehensive self-test on the hard drive.
Memory Test Run a diagnostic test on the system memory.
Setup Utility Menus 71
To Next Page
Loading...
Need help?
General