HP NonStop SSL User Manual

HP NonStop SSL Reference Manual Configuration • 57
• This parameter is relevant only if HP NonStop SSL is running in the FTPS or FTPC mode.
• Together with the parameter FTPMINPORT it controls the values HP NonStop SSL assigns for the FTP data
sockets. You can change this value to make sure that the FTP data connections will not interfere with other
TCP/IP services on your system.
FTPMINPORT
Use this parameter to specify the minimum port number HP NonStop SSL will use for FTP data connections
Parameter Syntax
FTPMINPORT number
Arguments
number
the minimum port number HP NonStop SSL will use for FTP data connections
Default
If omitted, HP NonStop SSL will use a value of 40000
Example
FTPMINPORT 20000
Considerations
• This parameter is relevant only if HP NonStop SSL is running in the FTPS or FTPC mode.
• Together with the parameter FPTMAXPORT it controls the values HP NonStop SSL assigns for the FTP data
sockets. You can change this value to make sure that the FTP data connections will not interfere with other
TCP/IP services on your system.
INTERFACE
Use this parameter to specify the IP address HP NonStop SSL should use for local binding on incoming connections.
Parameter Syntax
INTERFACE ip-address
Arguments
ip-address
the IP address to bind to or “*” for none
Default
If omitted, HP NonStop SSL will use the value of “*” and bind to no specific IP address
Example
INTERFACE 10.0.0.197
INTERFACE [2001:db9::1421:51ab]
Considerations

HP NonStop SSL Specifications

General

Brand	HP
Model	NonStop SSL
Category	Software
Language	English