Removal and Replacement Procedures
Maintenance and Service Guide 5–35
5.14 RTC Battery
✎
The RTC battery is included in the Plastics Kit, spare part
number 413704-001.
1. Prepare the computer for disassembly (Section 5.3).
2. Release the keyboard (Section 5.10).
3. Disconnect the RTC battery cable 1 from the system board.
4. Remove the RTC battery 2 from the clip in the top cover.
Removing the RTC Battery
Reverse the above procedure to install an RTC battery.
To Next Page
Loading...
Need help?
General