74
0a004h FXCH or FCOMP didn't work
0a005h FADD didn't work
0a006h FMUL didn't work
0a007h FDIV didn't work
0a008h FSQRT didn't work
0a009h FPATAN didn't work
0a00ah invalid operation exception err
0a00bh denormal operand exception error
0a00ch zero divide exception error
0a00dh overflow exception error
0a00eh underflow error
Weitek Numerical Co-
Processor Errors
0af00h failed to enter protected mode
0af01h there is no Weitek in the system
0af02h error in Weitek data register
0af05h ADD didn't work
0af06h MULT didn't work
0af0Ch Zero Divide exception error
Video Errors
0b009h beep if no video card is installed
error codes B001-B008, B100, B200, B301-B307, B400-
BFFF were previously used
Cache Errors
0b308h internal cache error
0b300h P4 cache test failure
Protected Mode RAM
Errors
0c000h 0CXYZ - the interpretation of this
error code is machine dependent
error codes D000, D003-D040, D050, D1XX, EXXX, FFXX
were previously used
To Next Page
Loading...
Need help?
General