HP Omnibook XE3 Reference Guide

Specifications and Regulatory Information
Modem Reference Information
Reference Guide 141
Register Function (Ambit) Range/units Default
S16 Test mode bit mapped options status (&T) 0
S18 Test timer 0-255/s 0
S19 AutoSync options 0
S20 AutoSync HDLC address or BSC Sync character 0-255 0
S21 V.24/general bit mapped options status 52 (34h)
S22 Speaker/results bit mapped options status 117 (75h)
S23 General bit mapped options status 62 (3Dh)
S24 Sleep inactivity timer 0-255/s 0
S25 Delay to DTR off 0-255/s or .01s 5
S26 RTS-to-CTS delay 0-255/.01 s 1
S27 General bit mapped options status 73 (49h)
S28 General bit mapped options status 0
S29 Flash dial modifier time 0-255/10 ms 70
S30 Disconnect inactivity timer 0-255/10 s 0
S31 General bit mapped options status 194 (C2h)
S32 XON character 0-255/ASCII 17 (11h)
S33 XOFF character 0-255/ASCII 19 (13h)
S36 LAPM failure control 7
S37 Line connection speed 0
S38 Delay before forced hangup 0-255/s 20
S39 Flow control bit mapped options status 3
S40 General bit mapped options status 104 (68h)
S41 General bit mapped options status 195(C3h)
S46 Data compression control 138
S48 V.42 negotiation control 7
S82 LAPM break control 128 (40h)
S86 Call failure reason code 0-255
S91 PSTN transmit attenuation level 0-15/dBm 10 (country
dependent)
S92 Fax transmit attenuation level 0-15/dBm 10 (country
dependent)
S95 Result code messages control 0
Selected Result Codes (Ambit)
Code Meaning
0OK
1 CONNECT
2RING
3 NO CARRIER
4 ERROR
5 CONNECT 1200
6 NO DIAL TONE
7BUSY
8 NO ANSWER

HP Omnibook XE3 Specifications

General

Brand	HP
Model	Omnibook XE3
Category	Laptop
Language	English