HP OmniBook XE4500 User Manual

2-20 Removal and Replacement HP Omnibook XE4100/XE4500
Removing the Top Case
(HP Authorized Service Providers Only)
Required Equipment
• Small Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
• Hard disk drive (page 2-6).
• Keyboard cover (page 2-10).
• Speaker assembly (page 2-12).
• Switchboard PCA (page 2-13).
• Keyboard (page 2-13).
• CD/DVD drive (page 2-16).
• Display assembly (page 2-17).
3. Remove the two screws from the rear of the bottom case.
4. Remove the screws from the middle and near the back of the top case.
5. Remove the rubber screw plugs and screws from the bottom case.
6. Lift the top case off of the notebook and then disconnect the touch pad cable from the
motherboard.

HP OmniBook XE4500 Specifications

General

Brand	HP
Model	OmniBook XE4500
Category	Laptop
Language	English