Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket.
Description Spare part number
For use in dv3000 models:
320-GB, 5400-rpm 468810-001
250-GB, 5400-rpm 468809-001
160-GB, 5400-rpm 468808-001
120-GB, 5400-rpm 468807-001
For use in dv3500 models:
500-GB, 5400-rpm 497761-001
400-GB, 5400-rpm 497760-001
320-GB, 5400-rpm 496115-001
250-GB, 5400-rpm 496114-001
160-GB, 5400-rpm 496113-001
Hard Drive Kit (includes hard drive bracket and screws) 468811-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 43).
Remove the hard drive:
1. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the hard drive bay cover to the
computer.
Component replacement procedures 51
To Next Page
Loading...
Need help?
General